Steam Sterilizer Manufacturers

Om Industries are engaged in manufacturing a wide range of Autoclave, industrial autoclaves & Steam sterilizer that is sturdy in construction as it is manufactured using plates of appropriate thickness to prevent buckling under vacuum or bulging due to pressure.

1. Neelam Autoclave or Steam Sterilizer will be in sturdy construction using plates of appropriate thickness which prevents buckling under vacuum or bulging due to pressure.
2. Fully automatic by means of PLC base controls, which operate pneumatically actuated solenoid valves. Provision of four different cycles and programmes.

1. Standard Cycle Operating Pressure -1 Bar to + 4 Bar

• Heat up- ster hold (121°C) - exhaust
• Heat up- ster hold (134°C)- exhaust

The technique uses the method of gravity air removal to ensure uniforms steam distribution and penetration.

Steam trap equipped with air vent ensure maximum air removal. Useful for sterilization of glass containers i.e. ampules, vials, glass bottles etc. It is also useful for Sterilization of glass wares, utensils, vessels, instruments, rubber articles linen etc. 

for more details visit us at: http://www.omindustries.co.in

Rotogravure Printing Machine

We are manufacturers and suppliers of Plastic Processing Machines, Plastic Printing Machines and Equipment. Our range is acknowledged for high operation efficiency standards, low maintenance, reliable performance and longer service life.

We bring forth a precision engineered range of Rotogravure Printing Machines, which is fabricated using high quality raw material. Designed keeping in mind the industry standards, our range has redefined the parameters of technical excellence with its outstanding features. Highly efficient, these are best known for their user friendliness, easy operations and optimum performance

Printing Materials : -

• Polyste.
• BOPP
• LD/HP
• PP PAPER
• Alumunium Foil
• Bilister Foil.

We, Om Industries, for more details reach at info@omindustries.co.in and  http://www.omindustries.co.in/

ETO Sterilizer Manufacturers

Neelam ETO Sterilizer will be in sturdy construction using plates of appropriate thickness which prevents buckling under vacuum or bulging due to pressure. Made as per I.S. 3829 or ASTM Specifications.

1. Standard Cycle Operating Pressure-1Bar to + 2 Bar

·         This technique uses near 100% air removal fromsterilization chamber which results in better temperature uniformity in the chamber because of the absence of air pockets ie. Cold spots.

·         This technique increases the penetration of Eto gas in porous products from which removal of air is difficult.

2. Vacuum drying at the end of sterilizing hold period ensures drying of the material which has been sterilized it is useful for ampoules in cassettes, small items of processing and packaging equipment entering the class 1 area and processing drums, garments, fabrics, drying, rubber bungs vessels machine parts, liquids in bottles and PVC pouches etc.

3. Leak Test Cycle for periodic testing of door integrity and pipeline connections & detecting leakage ampoules.

4. Another HP HV Cycle with post vacuum pulses can be provided, if required for special purpose. SS Construction with internal jacket plus Non contact part SS 304

The unit is mounted on sturdy tubular stand with level adjustment facility.

The jacket is made special technology (Dimple Jacket) which ensures better heat distribution in Chamber. And low cost operating fast sterilizing cycle.

Dry Heats Sterilizer Manufacturers

Dry Heat Sterilizer

We are offering a wide range of Dry Heat Sterilizer and Industrial Heat Sterilizer.

Salient Features

• Total GMP model
• Class 100 filter provided at air inlet in chamber.
• Pre Filter Provided at air inlet & outlet.
• In Micro Processor for process operation with 10 programme
• 8 Channel temperature scanning with processor
• Mimic display on control panel
• Cooling attachment for rapid cooling
• Document like DQ, IQ, OQ, PQ provided.

Pharma Machinery Manufacturer

Granule Mixing Machine

The Granule machine incorporates many outstanding features to give long & hassle free operation. The built in hi-tech design is equipped with increased motor power which ensures high output at minimum operating costs.

Hydrulic Chees Pipe Staighter

This innovative product will certainly give you relief from a terrific problem of bend and disturbed cheese pipes. It corrects the inner dia. of your disturbed cheese pipe and you can Re-Use it.

It takes just 1/3 minute to correct one cheese pipe.

Hot Air Dryers

A simple hot air dryer will suffice when you need to remove surface moisture from non-hygroscopic resins. A hot air dryer works very simply. It consists of a heater blower unit mounted on drying hopper and a control for the HB. Ambient air is drawn through a filter into a heater/blower unit and heated. The temperature can be adjusted up to 350˚F. The heater/blower is mounted on the drying hopper and the hot air is circulated up through the material in the hopper, carrying surface moisture up and out of the top of the hopper. The control for the heater/blower can be mounted on the hopper stand or on a nearby wall.

You use these same heater blower units in a central drying system but in that case, dry air is supplied to the HB from the central dryer and the process air is re-circulated back to the dryer.

In either case, it is important to provide an HB with a blower large enough to ensure sufficient airflow through the hopper.

Six station cutter

Descriptionl.  

Advantage [single to six station]: absolutely eliminated ideal time maximum utilization of tape plant easy to operate in six station cutter, cutter will be changed after 12 days. payback: a. Power saving: in each stoppage it takes minimum of 20 minutes to stop + 60 minutes to change mesh + 20 minutes to start = the total time is 100 minutes in hole of this time total system is on means power loss is 60 minutes of working load = 150 units [power saving per month =150 units x 30 = 4500 units] a. Power saving: if we dont stop the plant twice in day we will get minimum one-hour production more. one hour production = 150 ~200 kg. hence, the payback period is only 2-3 months.

Pharma Machinery Manufacturer

Granule Mixing Machine

The Granule machine incorporates many outstanding features to give long & hassle free operation. The built in hi-tech design is equipped with increased motor power which ensures high output at minimum operating costs.

 Hydrulic Chees Pipe Staighter

Hydrulic Chees Pipe Staighter

This innovative product will certainly give you relief from a terrific problem of bend and disturbed cheese pipes. It corrects the inner dia. of your disturbed cheese pipe and you can Re-Use it.

It takes just 1/3 minute to correct one cheese pipe.

Hot Air Dryers

A simple hot air dryer will suffice when you need to remove surface moisture from non-hygroscopic resins. A hot air dryer works very simply. It consists of a heater blower unit mounted on drying hopper and a control for the HB. Ambient air is drawn through a filter into a heater/blower unit and heated. 

Hot Air Dryers

The temperature can be adjusted up to 350˚F. The heater/blower is mounted on the drying hopper and the hot air is circulated up through the material in the hopper, carrying surface moisture up and out of the top of the hopper. The control for the heater/blower can be mounted on the hopper stand or on a nearby wall.

You use these same heater blower units in a central drying system but in that case, dry air is supplied to the HB from the central dryer and the process air is re-circulated back to the dryer.

In either case, it is important to provide an HB with a blower large enough to ensure sufficient airflow through the hopper.

Six station cutter

Six station cutter

Descriptionl.  

Advantage [single to six station]: absolutely eliminated ideal time maximum utilization of tape plant easy to operate in six station cutter, cutter will be changed after 12 days. payback: a. Power saving: in each stoppage it takes minimum of 20 minutes to stop + 60 minutes to change mesh + 20 minutes to start = the total time is 100 minutes in hole of this time total system is on means power loss is 60 minutes of working load = 150 units [power saving per month =150 units x 30 = 4500 units] a. Power saving: if we dont stop the plant twice in day we will get minimum one-hour production more. one hour production = 150 ~200 kg. hence, the payback period is only 2-3 months.